• 🦾 Print Rubber Without a TPU Printer Shore 70A elasticity — the same hardness as a car tire — delivered through your LCD, SLA, or DLP printer. No filament machine needed.
• ↩️ Bend It, Twist It, Compress It — It Comes Back Withstands repeated flexing and compression without permanent deformation. Built for moving parts, wearables, and anything that takes a beating.
• 🔒 Tear-Resistant Even in Thin Sections Enhanced tear resistance — means fine details and thin walls hold up in real-world use — not just on the print bed.
• 🖐️ Clean, Dry, Non-Sticky Surface — Right Off the Printer No tacky residue, no dust attraction. Parts feel finished and professional straight from the wash-and-cure station.
• 💨 Low Odor, Low Viscosity — Better Flow, Better Workspace Improved resin flow reduces print failures on fine features, while low odor keeps your workspace comfortable during long print sessions.
• 🎯 Built For — Handles, grips & shoe molds · Seals, gaskets & masks · Cushioning, damping & shock absorption.

Exposure time

Layer Height: 0.05 mm

Bottom Layer Count: 5 - 10

Bottom Exposure Time
Monochrome LCD screen: 25-100s
RGB LCD screen: 30-120s

Exposure Time
Monochrome LCD screen: 5-10s
RGB LCD screen: 8-30s

Lifting Distance
7-inch printer: 6-10 mm
Printers larger than 7-inch: ≥ 8 mm
Printers larger than 10-inch: ≥ 10 mm

Lifting Speed: 60-90 mm/min

Retract Speed: 60-90 mm/min

* The settings displayed above are intended as guidance to help you find your optimal print settings. Each desktop 3D printer has its own characteristics and requires fine-tuning and optimization of these settings to achieve the best printing results.

Inslogic Flexible 70A Resinは、当社のレジン製品ラインナップの中で最も柔らかい素材です。ショア硬度70Aを備え、ゴムまたはTPUの柔軟性を再現します。ショア硬度スケールはA（柔軟）からD（硬質）まであり、どちらのスケールも0（最も柔らかい）から100（最も硬い）までの値で表されます。Flexible 70A Resinは、柔らかくゴムのような質感を持つため、耐衝撃性に優れた柔軟なプリントに最適です。

強度と柔軟性の両方を追求して設計されたFlexible 70A Resinは、破損することなく曲げ、圧縮、繰り返しの屈曲に耐えます。その特性により、クッション性、制振性、衝撃吸収性が求められる用途に特に適しており、過酷な環境でも長期間にわたる性能を発揮します。

385-405 nmの範囲に対応するLCD、SLA、 および DLP 3Dプリンターと互換性があります。 

• Net Weight: 1 kg (35.27 oz)
• Container Weight: 205 ±7 g
• Tensile Strength: 4 MPa
• Elongation at Break: 140%
• Density: 1.19 g/cm3 at 23 ℃
• Viscosity: ≤2000 mPa.s at 25 ℃
• Shore D Hardness: 70A

*All specifications have been tested in a laboratory. Please note that material properties may vary based on part geometry, print orientation, print settings, and temperature. Certain specifications may be subject to change without prior notice.

• Technical Data Sheet (TDS)
• Safety Data Sheet (SDS)