Inslogic 低反りナイロン PA6/66フィラメント 1.75mm

• 🎯 Built For: Gears, Bearings & Sliding Parts · Jigs & Fixtures · Chemical-Resistant Components · High-Wear End-Use Parts & Functional Prototypes
  
• 🔩 103 MPa Flexural Strength — Large Parts, Zero Warping
  High flexural rigidity resists the uneven cooling forces that warp large or intricate prints. Get precise dimensions on complex geometries, first time.
  
• 💪 79 MPa Tensile Strength — Built for High-Load Applications
  Superior abrasion resistance combined with high tensile strength makes it ideal for functional end-use parts that take repeated impact, friction, and heavy loads.
  
• 🧪 Resists Oils, Acids, Alkalis & Solvents: Chemical resistance across a broad spectrum makes PA6/66 the go-to for parts exposed to fuels, lubricants, and industrial fluids — where PLA and PETG simply fail.
  
• ⚙️ Moves Without Wearing Out — Low Friction, Long Service Life
  Melts at 198°C with a low friction coefficient — engineered for gears, bearings, and sliding components where metal-on-plastic contact demands durability. Less wear, longer part life.
  
• 🔗 Better Layer Adhesion — Stronger Prints, Less Delamination
  Enhanced formulation improves interlayer bonding throughout the print, delivering smoother surfaces and structurally sound parts even under mechanical stress.
  
• ✅ Compatible with Bambu Lab AMS and A1 Mini.

• Drying Settings: 80 °C for 48h, 110 °C for 3h
• Nozzle Size: 0.2, 0.4, 0.6 mm
• Nozzle Temperature & Printing Speed: 250-270 °C at a speed of 50-100 mm/s, and 270-280 °C at a speed of 100-150 mm/s
• Bed Temperature: 30 - 50 °C
• Cooling Fan Speed: 100%
• Bed Type: Textured PEI Sheet
• Glue: Recommended for larger prints
• Heated chamber: Recommended for larger prints

* The settings displayed above are intended as guidance to help you find your optimal print settings. These ranges in settings should work for most printers. Each desktop 3D printer has its own characteristics and requires fine-tuning and optimization of these settings to achieve the best printing results.

Inslogic ナイロン PA6/66 フィラメントは、直径1.75mmのフィラメントを使用するFDM 3Dプリンター向けに汎用設計されており、寸法精度は±0.02 mmです。

Inslogic ナイロン PA6/66共重合体は、非常に強く、耐久性に優れ、汎用性の高い3Dプリント材料をお探しの方に最適です。反りが大幅に少なく、層間接着性が向上しており、優れた引張強度を備えています。当社独自の配合により、他のナイロンフィラメントと比べて、優れた機械的特性を維持しながら、比較的低い温度でInslogic ナイロン PA6/66を3Dプリントできます。そのため、最終用途部品の3Dプリントに適した汎用性の高いナイロンフィラメントです。

ナイロン PA6/66は、衝撃、摩耗、擦り減りに加え、オイル、燃料、潤滑剤など一部の化学物質に対して優れた耐性を発揮します。高い耐衝撃性と優れた機械的特性を備えています。低い摩擦係数と198°Cの高い融点を持つため、機能試作品、工具、ギア、最終用途部品の3Dプリントなどに最適です。

ナイロンは吸湿性のある材料で、周囲の環境から水分子を吸収して保持します。プリント前およびプリント中は、乾燥した状態を保つことをおすすめします。乾燥剤と一緒に密閉容器などで保管してください。

* Bambu Lab AMSおよびA1 miniに対応しています。

• Length: 370 m
• Net Weight: 1 kg
• Reusable Spool & Cardboard Coil Weight: 232 ± 3 g
• Total Weight: 1.233 ± 0.03 kg
• Diameter: 1.75 mm ± 0.02 mm
• Tensile Strength: 79 MPa
• Elongation at Break: 32%
• Flexural Strength: 103 Mpa
• Flexural Modulus: 2397 Mpa
• Izod Impact, Notched: 6.63 KJ/m²
• Density: 1.08 g/cm³
• Heat Deflection Temperature at 0.45 MPa: 123 ℃

* All specifications have been tested in a laboratory. Please note that material properties may vary based on part geometry, print orientation, print settings, and temperature.

• Technical Data Sheet (TDS)
• Safety Data Sheet (SDS)
• Instructions for using Inslogic reusable spool and refill filament