Inslogic PLA Proフィラメント 1.75mm
オプションを選択
What Makers Are Saying
"eccezionale filamneto che si stampa anche in velocità, packaging che che puo' permettere di aprire e stampare subito.spinto in velocità si comporta molto bene . diverràil mio riferimento"
"Inslogic PLA Pro (white) is very nice filament. It is a very bright white, more white than my other white filament which is more of a warm white. I want to try other colors to see any differences. It prints well and seems to be stronger than my other PLA filaments."
"I have been using inslogic pla pro now for a few months. I love it! Prints smooth rolls are neatly wrapped. Hoping they get some more colors soon."
"This batch I ordered went on the selves for later use. I have used this filament before. I use it mainly for printing RC airplanes and was very pleased with the results."
"First test print with excellent result. Great filament."
"Strong and prints like a dream. I'm new to 3d printing and am just branching out into different filament brands. Inslogic is my new favorite."
"Inslogic 1.75 mm Pro PLA Filament is of superior quality. And unlike many other suppliers, I've never had any of their filament tangled on the spool when it was shipped. Cannot recommend highly enough."
"A very good product of consistent quality. Consistent print results. A top-class end result."
"Excellent results with this PLA on my Bambu Lab H2C. Thepackaging is awesome and amazing as usual. I would highly recommend"
"The pla pro filament worked great. Laid down smooth with hardly a visible layer line, would have to closely inspect to find a layer line. I didn't have any issues with bed adhesion and warping of any kind, using Bambu Labs P1S."
"Excellent filament, nice color. So far prints come out looking clean compared to other Grey Filament used. I will like to try out there greater selection of filaments and color. Overall im satisfied and will purchase again."
"Just started using Inslogic filament 2 months ago. I really like the quality and color selection right now. I have used the petg pro and pla pro. They are my new favorite filament for my company."
"Nice smooth prints great colors quick service"
- 🎯 Consistent Diameter = Consistent Prints: 1.75mm ±0.02mm tolerance, Smooth, stable extrusion, Fewer clogs and interruptions.
- 💪 Stronger Than Standard PLA: Enhanced toughness helps prevent cracking and snapping — ideal for functional parts.
- 💨 Pre-Dried & Vacuum Sealed: Factory-dried and sealed with desiccant to reduce moisture issues like stringing and bubbles.
- 🖨 Prints Like PLA (No Setup Changes): No enclosure required, Minimal warping, Excellent bed adhesion, Just load it and print.
- ⚙ Works with Your Printer: Compatible with most FDM printers - Creality, Ender, Prusa, Anycubic, Bambu Lab, Voron, and more.
- 🧠 Perfect For: Prototyping, Functional & mechanical parts, Educational & school projects, Decorative models, Daily household prints. From quick prototypes to long, complex prints—PLA Pro delivers reliable results.
- Refill Filament compatible with Bambu Reusable Spool and Sunlu Reusable Spool.
- Drying Settings: 50 °C, 4h
- Nozzle Size: 0.2, 0.4, 0.6 mm
- Nozzle Temperature & Printing Speed: 195-205°C at a speed of 50-100 mm/s, and 205-220°C at a speed of 100-300 mm/s
- Bed Temperature: 50 - 60 °C
- Cooling Fan Speed: 100%
- Bed Type: Textured PEI Sheet, Cool Plate
* The settings displayed above are intended as guidance to help you find your optimal print settings. These ranges in settings should work for most printers. Each desktop 3D printer has its own characteristics and requires fine-tuning and optimization of these settings to achieve the best printing results.
Inslogic PLA Pro（ポリ乳酸）フィラメントは、汎用性、使いやすさ、環境への配慮に優れているため、3Dプリントで最も人気のある素材の一つです。フィラメントは汎用設計で、直径1.75mm、精度±0.02 mmのフィラメントを使用するFDM 3Dプリンターに対応しています。
当社のプロフェッショナルPLAは生分解性で、無臭の印刷を実現します。
機械的特性が向上したPLA Proは、引張強度56 MPa、優れた衝撃強度20.1 KJ/m²を備えており、ABSに近い性能で、ほとんどの印刷ニーズに応える剛性と強度を提供します。また、最大300 mm/sの高速印刷向けに最適化されており、高速印刷や大規模なプロトタイピングプロジェクトに対応します。
PLA Proはより低い溶融温度で印刷でき、反りが少ないため、非常に印刷しやすい素材です。豊富なカラーバリエーションから選べるため、高品質なプリントを簡単に実現し、アイデアを形にできます。
きれいに配置され、加熱式プリントベッドを使用する必要がないため、初心者や3Dプリントを始めたばかりの方に最適です。
* Bambu Lab AMSおよびA1 miniに対応。
- Length: 320 m
- Net Weight: 1 kg
- Reusable Spool & Cardboard Coil Weight: 232 ± 3 g
- Total Weight: 1.233 ± 0.03 kg
- Diameter: 1.75 mm ± 0.02 mm
- Tensile Strength: 56 MPa
- Elongation at Break: 20.3%
- Flexural Strength: 85.8 Mpa
- Flexural Modulus: 2795 Mpa
- Izod Impact, Notched: 20.1 KJ/m²
- Shore D Hardness: 83D
- Density: 1.20 g/cm³
- Heat Deflection Temperature at 0.45 MPa: 55 ℃
* All specifications have been tested in a laboratory. Please note that material properties may vary based on part geometry, print orientation, print settings, and temperature.
How to Use Inslogic Reusable Spool and Refill
FAQ
Shipping
It depends on where you are.
Within our delivery locations, all packages are shipped via USPS, DHL, FedEx, DPD, or UPS and will arrive within 3-10 business days (except for pre-sale items).
United States: 3-7 business days
Germany: 1-3 business days
Other Europe Contury: 3-10 business days
United Kingdom: 2-4 business days
Delivery details will be provided in your confirmation email. Check delivery location here.
About Filament
Inslogic Refill Filament compatible with Bambu Reusable Spool and Sunlu Third-Generation Reusable Spool.
It is recommended to keep them in a dry and cool place, away from direct sunlight and moisture.
Consider using vacuum-sealed bags to keep moisture, odors, and bugs away.
The quality of your prints depends on both the printer and the filament used.
To achieve the best results, it's advisable to fine-tune the slicing parameters to discover the optimal settings for various filaments and printers.
- The nozzle might be too distant from the bed.
- Ensure that your heated bed is both level and clean.
- Additionally, confirm that your printing and bed temperatures are within the correct range; Adjust them if necessary.
When working with specialty filaments like ABS, ASA, and others, consider reducing the first layer print speed to enhance your chances of success.
eccezionale filamneto che si stampa anche in velocità, packaging che che puo' permettere di aprire e stampare subito.spinto in velocità si comporta molto bene . diverràil mio riferimento
Inslogic PLA Pro (white) is very nice filament. It is a very bright white, more white than my other white filament which is more of a warm white. I want to try other colors to see any differences. It prints well and seems to be stronger than my other PLA filaments.
This batch I ordered went on the selves for later use. I have used this filament before. I use it mainly for printing RC airplanes and was very pleased with the results.
I have been using inslogic pla pro now for a few months. I love it! Prints smooth rolls are neatly wrapped. Hoping they get some more colors soon.
Just started using Inslogic filament 2 months ago. I really like the quality and color selection right now. I have used the petg pro and pla pro. They are my new favorite filament for my company. I just hope I can work out a deal on wholesale prices.
First test print with excellent result. Great filament.
This is a really nice shade of blue, and the filament prints well.
I had no issues with jamming, bed adhesion, or breakage. For some reason, I've found that a lot of blue filaments tend to be brittle. I had no issues with that with this filament.
Supports broke off relatively cleanly, but my brim did seem to have a bit of a death grip on my print. I'm going to have to use a de-burring tool to clean up my print.
I love this shade of blue. Pictures don't really do it justice. It's a "bright" blue. Think blue jays, Smurfs. I can see a lot of different applications for this color.
I think this is an excellent filament for 3D Printing.
It printed great, no problems with adhesion when using my generic PLA settings.
The packaging is very tight, the holes in the tray can be used directly on amslite, and the print quality is very good
Adhesion is fine and there are no issues with brittleness or nozzle clogs. Flow has always been consistent and the print quality overall is great.
I had a great experience with the Inslogic PLA Pro filament. It printed flawlessly with no issues—no clogs, bubbles, or tangling. The layer adhesion was excellent, and prints came out strong and durable, just as advertised. I also appreciate that the spool is recyclable, which is a nice eco-friendly touch. Overall, a reliable and high-quality filament that I’ll definitely be using again!
All prints were done on a BambuLab A1 Mini after dehydrating the filament.
This filament printed well with no issues. I like the color and quality and the reusable spool is nice to have on hand. For the price, I didn't notice any quality or durability difference from this filament over other Pro PLAs I have printed with that cost less.
This filament prints prefect every time! I never need to watch the first few lines go down or ever need to dry this stuff.
I'm about half way through this spool and I'm very pleased with the results. The winding has been great, the filament has been consistent, and the color/finish is a great blend of grey with a matte finish that is really very nice. It appears slightly darker in color than what is shown in the picture, but not by very much. I'm also quite excited about the reusable spool once finished, as that is going to allow me to save money on refills instead of just throwing out spool after spool. I haven't used this brand of filament before, but I will gladly in the future thanks to these stellar results. Recommended.
The filament prints flawlessly and the color always turnout vibrant. Inslogic will always be my go to because of its great price and quality, reliable performance.
Every spool I’ve ordered comes in perfect condition and provides quality prints. Love this brand!
I ran out of black filament and picked this up to test. The filament comes on a plastic spool which is what I prefer to run through my Bambu Lab AMS and the filament runs through it perfectly fine. The filament is dimensionally accurate and measures in at 1.75mm in several areas that I tested. This filament prints perfectly fine using my default setting for generic PLA and I was able to run my test prints without any issue. The initial layer of pla sticks well and the layer lines came out perfect with good adhesion. Overall this filament works perfectly well in my 3d printer.
Great print quality, buttery smooth!
I printed the pictured Benchy using this Inslogic black PLA sliced with default settings in Digital Factory on a Makerbot Method. The walls, overhangs, and bridges are good, and the sheen is uniform. The chimney is significantly deformed, but I didn't see what happened during the print. I may need to adjust the parameters for single extrusions, but I'm not too concerned.
Prints well with no issues. I've used it specifically for some filament clips since it's flexible and hopefully won't experience the normal PLA fatigue.
