Inslogic TPU 90Aフィラメント 1.75mm

• Flexible and Durable: Shore 90A TPU offers excellent flexibility with strong rebound. Parts stay in shape even after bending, stretching, or repeated use.
• Skin-Friendly & Non-Irritating: Formulated with zinc-based additives for low irritation and safe prolonged contact. Ideal for watch bands, handles, and wearable prints.
• UV and Heat Resistant: The material resists yellowing, brittleness, and oxidation. Prints hold up well in outdoor settings and high-temperature environments.
• Tear and Impact Resistant: Soft but strong enough to handle impact and repeated stress. A reliable choice for protective, structural, or wearable parts.
• Smooth and Easy Printing: Works with most FDM printers at 220 to 240°C. Delivers consistent flow with minimal stringing using 0.4 or 0.6 mm nozzles and PEI beds.
• Applications: Soft-touch multi-material models or handles, Mechanical parts, Protective covers, safety covers & bumpers, Springs, seals & shock absorbers, Wheels and rollers, Shoe soles, watch straps
• All AMS Series NOT Compatible

• Drying Setting: 50°C, 4h
• Nozzle Size: 0.4, 0.6mm
• Nozzle Temp & Printing Speed: 220 - 240°C ≤40mm/s
• Bed Temp: 30-60°C
• Cooling Fan Speed: 100%
• Bed Type: Textured PEI sheet, Cool Plate

* The settings shown above are intended as a guide to help you discover your ideal print settings. While these settings should generally work for most printers, don't hesitate to experiment beyond these ranges if you believe it's suitable for your specific printer. Due to the numerous printer types, hot-ends, and printer offsets available, it's extremely challenging to provide a single, universally applicable setting.

Inslogic TPU 90Aフィラメントは、直径1.75 mm、精度±0.03 mmのフィラメントを使用するFDM 3Dプリンターに対応した実用的な素材です。

Inslogic TPU 90Aフィラメントはより柔らかく、優れた柔軟性を備えています。耐摩耗性に優れ、耐候性も高いため、黄変やひび割れが起こりにくいのが特長です。ウェアラブルデバイス、保護ケース、スポーツ用品など、柔軟性と強度の両方が求められる用途に最適です。

Inslogic TPU 90Aフィラメントは、耐久性と柔軟性を追求して設計されており、衝撃吸収やソフトなサポートに最適なフィラメントです。

• Length: 350 m
• Net Weight: 1 kg
• Diameter: 1.75 mm ± 0.03 mm
• Tensile Strength: 30 MPa
• Elongation at Break: >1000%
• Flexural Strength: /
• Flexural Modulus: /
• Izod Impact, Notched: No Break
• Density: 1.17 g/cm³
• Shore Hardness: 90A
• Heat Deflection Temperature at 0.45 MPa: 36 ℃

* All specifications have been tested in a laboratory. Please note that material properties may vary based on part geometry, print orientation, print settings, and temperature.

• Technical Data Sheet (TDS)
• Safety Data Sheet (SDS)
• Instructions for using Inslogic reusable spool and refill filament