Inslogic Nylon PA6/66 Filament 1KG with Spool + 1KG Refill
Choose options
- High strength & resistance to abrasion
- Chemical resistance
- Lower warping
- Easier to print with enhanced layer adhesion
- Low friction coefficient
Inslogic Nylon PA6/66 is an easier-to-print nylon filament with much lower warping and improved layer adhesion. 3D printed parts are strong, durable, and exhibit good resistance to wear, abrasion, and chemicals.
Applications: Functional prototypes, Making jigs and fixtures, Parts resistant to oils, fuels & chemicals, End-use parts requiring high wear resistance
Inslogic Nylon PA6/66 Filament is universally designed and compatible with FDM 3D printers using 1.75mm diameter filament, with a precision of ±0.02 mm.
Inslogic Nylon PA6/66 copolymer is a perfect material if you are seeking an incredibly strong, durable, and versatile 3D printing material. It exhibits much lower warping, improved layer adhesion, and good tensile strength. With our unique formulas, compared to other Nylon filaments, you can 3D print Inslogic Nylon PA6/66 at relatively lower temperatures while maintaining its excellent mechanical features, making it a versatile nylon filament for 3D printing end-use parts.
Nylon PA6/66 exhibits excellent resistance to impact, wear, abrasion, and some chemicals such as oils, fuels, and lubricants. It has great impact strength and good mechanical properties. With a low friction coefficient and a high melting temperature of 198°C, it is an excellent choice for applications such as 3D printing functional prototypes, tools, gears, and end-use parts.
Nylon is a hygroscopic material, and will attract and hold molecules from the surrounding environment. It is recommended to keep it dry before and during printing. Please store it in a sealed container with desiccant packets or similar.
* Compatible with Bambu Lab AMS and A1 mini.
- Length: 370 m
- Net Weight: 1 kg
- Reusable Spool & Cardboard Coil Weight: 232 ± 3 g
- Total Weight: 1.233 ± 0.03 kg
- Diameter: 1.75 mm ± 0.02 mm
- Tensile Strength: 79 MPa
- Elongation at Break: 32%
- Flexural Strength: 103 Mpa
- Flexural Modulus: 2397 Mpa
- Izod Impact, Notched: 6.63 KJ/m²
- Density: 1.08 g/cm³
- Heat Deflection Temperature at 0.45 MPa: 123 ℃
* All specifications have been tested in a laboratory. Please note that material properties may vary based on part geometry, print orientation, print settings, and temperature.
- Drying Settings: 80 °C for 48h, 110 °C for 3h
- Nozzle Size: 0.2, 0.4, 0.6 mm
- Nozzle Temperature & Printing Speed: 250-270 °C at a speed of 50-100 mm/s, and 270-280 °C at a speed of 100-150 mm/s
- Bed Temperature: 30 - 50 °C
- Cooling Fan Speed: 100%
- Bed Type: Textured PEI Sheet
- Glue: Recommended for larger prints
- Heated chamber: Recommended for larger prints
* The settings displayed above are intended as guidance to help you find your optimal print settings. These ranges in settings should work for most printers. Each desktop 3D printer has its own characteristics and requires fine-tuning and optimization of these settings to achieve the best printing results.
How to Use Inslogic Reusable Spool and Refill
Customer Reviews
Its the most neatly wound filament I've seen, printed extremely well on everything I tried, after I made something I heat tested it with a heat blower and normal PLA melts instantly, ABS takes a few seconds longer, but this filament I had it on for five minutes and it never melted at all
This filament worked out awesome I used it to create some articulating dragons.
