Inslogic PA6-GF25 Filament 1.75mm
Choose options
- Handles the Heat: With a heat deflection temperature of 210°C, Inslogic PA6-GF25 Filament stays solid under stress, outperforming standard nylon in high-temp and high-load environments.
- Stiff, Strong, and Stable: Reinforced with 25% glass fiber, prints with high rigidity and low warping. Delivers crack-resistant parts with excellent dimensional accuracy.
- Engineered for Tough Jobs: Built for demanding applications with 125 MPa tensile strength, 9.4 KJ/m² notched impact strength, and 17% elongation at break. Strong, durable, and dependable.
- Optimized for High-Temp FDM Printers: Prints smoothly at 270 - 290°C using hardened nozzles and PEI beds. Compatible with Voron, Bambu Lab, Prusa MK4, and similar high-performance setups.
- To reach peak performance (HDT 210°C), bake parts at 110°C for 6 hours.
- Applications: Manufacturing, Automotive, Tooling, Functional and structural parts
- All AMS Series NOT Compatible
- Drying Settings: 110 °C for 4h
- Nozzle: Hardened steel nozzle with a diameter of 0.4 or 0.6 mm
- Nozzle Temperature & Printing Speed: 270-290 °C at 50-120 mm/s
- Bed Temperature: 50 - 70 °C
- Cooling Fan Speed: 100%
- Bed Type: Textured PEI Sheet
- Annealing Settings: 110 °C for 6h
* The settings displayed above are intended as guidance to help you find your optimal print settings. These ranges in settings should work for most printers. Each desktop 3D printer has its own characteristics and requires fine-tuning and optimization of these settings to achieve the best printing results.
Inslogic PA6-GF25 Filament is an engineering-grade material, compatible with FDM 3D printers using 1.75 mm diameter filament with a precision of ±0.03 mm.
Inslogic PA6-GF25 is a high-performance 3D printing filament composed of Nylon 6 (PA6) reinforced with 25% glass fiber. This advanced material is engineered for strength, rigidity, and durability, making it ideal for demanding industrial and engineering applications.
With a heat deflection temperature of 210°C, Inslogic PA6-GF25 delivers outstanding thermal resistance, along with excellent mechanical properties such as high stiffness, dimensional stability, and wear resistance. Despite its reinforced composition, the material maintains strong layer adhesion and printability, providing reliable, high-quality results.
Created for applications where mechanical strength and thermal stability are critical, Inslogic PA6-GF25 offers a practical balance of performance, ease of printing, and cost-effectiveness. Its recyclability and ease of post-processing further enhance its appeal for both prototyping and end-use parts in sectors such as functional prototyping, tooling, and manufacturing.
- Length: 320 m
- Net Weight: 250g, 500g, 1 kg
- Diameter: 1.75 mm ± 0.03 mm
- Tensile Strength: 125 MPa
- Elongation at Break: 17%
- Flexural Strength: 190 Mpa
- Flexural Modulus: 16596 Mpa
- Izod Impact, Notched: 9.4 KJ/m²
- Density: 1.27 g/cm³
- Glass Transition Temperature, 10 °C/min: 65 ℃
- Heat Deflection Temperature at 0.45 MPa: 210 ℃
--------------------
1 kg Reusable Spool Specifications:
- Materials: PC
- Color: White grey
- Temperature Resistance: ≤110℃
- Spool & Cardboard Coil Weight: 232 ± 3 g
- Inner Hole Diameter: 55±0.1 mm
- Outer Diameter: 200±0.1 mm
- Width: 67±0.1 mm
* All specifications have been tested in a laboratory. Please note that material properties may vary based on part geometry, print orientation, print settings, and temperature.
How to Use Inslogic Reusable Spool and Refill
First time printing with any nylon much less nylon with GF. I printed this on my Centauri Carbon and only took a couple small prints to tune it in using generic profile in Orca. The print had a great surface finish and the biggest surprise to me was how lightweight the item felt. The lightweight feeling almost makes you think the print is fragile but that couldn't be further from the truth! This stuff is stout! After print the items i went ahead and annealed the parts just using an old countertop oven at 230 degrees for 6 hours. Again this was a first for me. Was not sure what to expect after annealing but the part looked and felt the same although I understand that annealing really adds strength, durability and heat resistance. Over all it was easy to print. I couldn't really speak about how strong it is compared to other filaments but it feels really tough.
Easiest PA6-GF I have worked with. Printed amazingly well with just a few tweaks to the default bambulabs profile. Material was dry and ready to use out of the box and printed cleaner and faster than bambulabs equivalent. Will be ordering more of this for sure!
Excellent tangle free roll with good quality and little to no moisture.
This PA6 GF25 pleasantly surprised me. It's relatively easy to use despite being a technical material, it sticks well to the bed, and the spool has given me very few issues.
The glass fibers improve surface finish, layer lines are less visible and the overall look is excellent. It costs a bit more than some other nylons, but the finish quality and consistency make it worth it. For me, it’s 5 stars.
Very fast shipment. Great product. Highly recommended
Really nice prints, uses BL X1C with heated chamber, works great
Very printable with Bambu A1 with hardened nozzle and in an enclosure. Printing with a brim ensures good bed adhesion. Makes tough parts.
Inslogic PA6-GF25, in a direct comparison of models printed on the same Bambu Lab H2D with the Inslogic vs Bambu Lab PA6-GF, the Inslogic version is visibly better in finish and hiding layer lines. The Inslogic PA6-GF25 will now be my goto PA6 filament. Very impressed!
